Hardware Instructions and Information
Basic Entry Level eGo Style Vaporizer
Ego Battery Instructions
The eGo-C upgrade battery is the newest improvement of Joyetech eGo style battery. It comes with the logo “eGo-CTM upgrade” branded laser in the bottom steel plate and “CE” and the WEEE label in the connector part. It’s sealed to prevent being spoiled by e-liquid.
The biggest improvement of this battery: it has two modes to switch. One is the constant voltage output mode which gives constant 3.3V (when it’s driving the atomizer. load added)) and is the same as the normal eGo-C battery. The other is variable voltage output mode, in this mode, the voltage will change from 4.15V to 3.6V as the lithium battery power decreases.
When you press the button and the LED is blue, the unit is in constant voltage mode.
When you press the button and the LED is orange, the unit is in variable voltage mode.
1c. To switch from variable voltage to constant 3.3v output mode, lock the battery by using 5 clicks (orange LED blinks 3 times).
2c. Then press and hold the button for 5 seconds (not 5 clicks), LED will change to blue with 3 blinks. The battery has now switched to constant voltage output mode.
3c. Then click the button 5 times to turn it back on.
4c. In constant voltage output mode, the LED is blue.
5c. When charging, blue LED will blink 5 times.
1v. To switch from constant voltage output mode to variable voltage output, lock the battery by using 5 clicks (blue LED blinks 3 times).
2v. Then press and hold the button for 5 seconds (not 5 clicks), LED will change to orange with 3 blinks. The battery has switched to variable voltage output mode.
3v. Then click the button 5 times, to turn it back on.
4v. In variable voltage output mode, the LED is orange and battery doesn’t have power display function.
5v. When charging, the orange LED will blink 5 times.
This battery also has the lock/unlock function (5-click protection) in both of the two modes. The new protection circuitry makes it safer and easier to use. This can prevent accidental battery discharge when not in use. Constant voltage output & variable voltage output, intensified short circuit protection, discharge and overcharge protection, and high-stability are features of this lithium battery.
10 seconds cutoff time!
Joye eGo-C Twist
One Battery – Various Voltage Choices
The inner smart Buck BOOST converter can adjust voltage from 3.2 volt to 4.8 volt.
Choose the voltage that works best for you and vape to your satisfaction!
A fully charged eGo-C Twist variable voltage battery will provide approximately 6 hours of vaping. It takes 2-3 hours to be fully charged using fast USB charger for eGo/eGo-T/eGo-C! Using the battery at a higher voltage output will drain the battery quicker than when using it at a lower voltage. Be careful not to damage atomizers/cartomizers. Driving them with too much power for too long or running them dry can burn them out. We recommend you starting with a low voltage setting and working your way up until you find the right setting for your atomizer/cartomizer.
How to adjust the output voltage?
There are 8 grids on the knob at the bottom, and each represents 0.2. Spin the knob in a clockwise direction to increase output voltage and spin the knob in anti-clockwise direction to decrease output voltage. High output voltage gives more vapor. You can adjust the output voltage so easily and enjoy the whole vapor time.
Generally, the battery is shipped in the off position. In off position, it will not function even when pressing the button. To turn on battery, press manual button 5 times within 2 seconds. You will see white LED flash. To turn off battery, press manual button 5 times within 2 second as well, the white LED will flash! “5-click protection” can protect the battery from being activated when you do not want or do not use it. No more firing in your pocket!
Pass through button
When pressing the button on a manual battery, users are urged to depress the button in a straight down manner with light pressure.
Pass through button
Pressing from the bottom or sides, as well as using too much pressure can result in damage to the button or the pressure switch inside the unit.
We can provide no warranty or returns for damaged buttons on the unit.
Indy Vapor Shop will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the use of any battery. Please have a basic understanding of the batteries you are using and how to care for them properly.
Read the information found at Battery University before purchasing. It is important to carry batteries properly, recharge properly, and dispose properly.